Precautions and characteristics of using a cross-cutting machine

Release time:

2022-05-17

Users familiar with cross-cut machines know their wide range of applications. Ordinary cross-cut machines are well-suited for the longitudinal and transverse cutting of various types of paper. Below, we will explore the precautions and characteristics of using a cross-cut machine.

Believe that those who have usedCross-cut machineUsers know that its application range is very wide. Ordinary cross-cut machines are very suitable for longitudinal and transverse cutting of various types of paper. Below, let's understand the precautions and characteristics of using the cross-cut machine.

Precautions for using the cross-cut machine

After finishing work, immediately clean the dust and paper scraps on the equipment, check the tools and grinding wheels, drain the accumulated water into containers and water tanks with higher water content, and check the die-cutting factory for any abnormalities in the running parts. Then, turn off the power according to the instructions in the manual and maintain the computer's operating system. Maintenance and maintenance work must be done. First, daily maintenance must be done. The principle is to do lubrication, cleaning, and cleaning (clean, no garbage) to ensure that the moving parts of the equipment are in good condition. Secondly, maintenance work should be done, and regular and irregular checks should be carried out on the rotating parts.

The gears of the cross-cut machine are all made of high-quality steel. Stable transmission, low noise, and long life. The computer-controlled cross-cutting machine knife holder has an advanced structure. Convenient knife adjustment, static torque balance processing of the knife shaft, stable operation. The computer-controlled rotary cutting machine adopts the new generation of computer systems from Taiwan and Germany, with excellent performance and long fault-free operation time. Imported blades and domestic blades are available for users to choose from. Suitable for three-layer, five-layer, and seven-layer corrugated board production lines. Regular adjustments and replacements should be made, and detailed records should be kept to extend the service life of the equipment. The electrical parts should be cleaned and inspected regularly, and dangers should be eliminated in time. Use high-quality longitudinal and transverse cutting blades. Improve the technical quality and level of operators, and the operation of the control part must be handled by a dedicated person. Without permission, no one is allowed to operate it on their own.

Due to different transmission control methods, the cross-cut machine of the die-cutting factory is controlled by an industrial control computer. According to the set length, it controls the rotation of the knife shaft to cut the corrugated board. In addition to the precision transmission of the mechanical part, the paper cutting error can also be controlled within 1 mm. The cross-cut machine has spiral blade cross-cut machines and straight blade cross-cut machines. Spiral tools are suitable for high-speed cutting of thick paperboards, and the paper cutting is stable and the blade life is long. Improve the technical quality and level of operators, and the operation of the control part must be handled by a dedicated person. Without permission, no one is allowed to operate it on their own.

Cross-cut machinePerformance and characteristics

1. The cross-cut machine adopts microcomputer control, magnetic powder clutch type tension control, and central winding method.

2. The main unit adopts a frequency converter, automatic meter measurement, and alarm functions, and the winding adopts A and B axes.

3. The unwinding uses a photoelectric automatic correction system to ensure that irregular materials are cut normally.

4. The cross-cutting circular knife longitudinally cuts, and the manufacturer's waste edge automatic discharge device.

5. A conical sleeve-type pneumatic shaft is installed on the unwinding shaft.

Die-cutting is to form customized parts of different sizes on the material through precise processing and cutting according to the specified shape.

The above is an introduction toCross-cut machinePrecautions and characteristics for use. For more information, please feel free to Contact Us! Our company has many years of experience and is always looking forward to your joining.