What is a non-woven fabric cross-cutting machine?

Release time:

2022-07-26

A non-woven fabric cross-cutting machine is a mechanical device that divides wide non-woven fabrics, paper, mica tape, or films into various narrow materials. It is commonly used in paper machines, wire and cable mica tapes, and printing and packaging machinery.

Non-woven fabric cross-cutting machineIt is a mechanical equipment that divides wide non-woven fabrics, paper, mica tapes, or films into various narrow materials. It is often used in paper machines, wire and cable mica tapes, and printing and packaging machines.

Non-woven fabric cross-cutting machines are mainly used for the splitting of non-woven fabrics, mica tapes, paper, insulating materials, and films, especially for narrow cutting.

The main structure of the non-woven fabric cross-cutting machine

1. Frame part: Welded with thick steel plates, sturdy, honest, and angle balanced.

2. Volume part: This machine divides the edges, and the operation is simple.

3. Roller part: The larger volume diameter can reach 600~700mm.

4. Cutting tool part: The distance of the cutting tool can be adjusted to 18mm~1600mm.

5. Main unit part: Mainly uses a 5KW motor and an electronic speed regulation system.

6. Guide roller part: The whole machine uses chrome-plated steel pipes, which have been dynamically balanced.

Non-woven fabric cross-cutting machineFunctions:

1. Thick steel plate welding, sturdy, angle balance, allowing the machine to run smoothly under high-speed working conditions.

2. The whole machine uses chrome-plated steel pipes, each dynamically balanced.

3. Uses a 3-inch expansion roller, with a volume diameter of up to 600mm

4. Using a 3-inch expansion roller and a magnetic powder tension controller to fold the reel, the splitting work is simple, and the reel diameter can reach 600 mm. The folded reel is beautiful and neat.

5. The cutting tool can use industrial surgical blades or flat blades (art blades) with adjustable cutting tools between 18mm-1600mm.

6. The spindle and the original path use a stepless speed regulation system, which can be used for high and low speed regulation and forward and reverse conversion control. Electronic speed regulation system, convenient and simple;

7. Double-sided diamond grinding knife system configuration; Sharpening is possible without disassembly, keeping the blade sharp for a long time. Achieving optimal cutting quality. A vacuum load is added to keep the fabric and guide rails clean.

8. Using imported ball screw and guide rail parallel feed to control the cutting width, the imported AC motor adjustment system controls unauthorized adjustments and cutting speed, achieving high-precision cutting with accuracy control within 0.1 mm.

9. In order to further ensure cutting accuracy, a high-precision compensation device system is equipped.

10. Using a quick disaster prevention design, the upper and lower clothes can be completed with one action, effectively reducing labor in production and improving productivity.

11. Automatic counting device, clear at a glance.

Before using the machine, carefully check the main components of the fully automatic non-woven fabric cross-cutting machine and add lubricant. When disassembling the non-woven fabric cutting machine, it is strictly forbidden to use inappropriate tools, and it is strictly forbidden to use unscientific operation methods. Perform a detailed cleaning and inspection of the machine every two or three weeks. When the non-woven fabric cutting machine is not used for a long time, all surfaces should be cleaned, anti-rust oil should be applied, and the entire machine should be covered with a plastic cover.

When the non-woven fabric cross-cutting machine is not used for more than 3 months, a moisture-proof layer should be placed on the anti-rust oil. After the work is completed, carefully clean the equipment, wipe the exposed friction surfaces clean, and then add lubricating oil.

Non-woven fabric cross-cutting machineThree points should be noted for maintenance and maintenance.

1. Regularly clean and inspect the local parts of the machine to eliminate hidden dangers in time.

2. The use is completed using a shredder and a cross-cutting machine, so high-quality tools must be used.

3. Daily maintenance must be in place, and the standard is smooth, clean, and clear, so that the sliding parts of the equipment remain in good condition.