What should I pay attention to when inspecting the mask machine?

Release time:

2021-09-23

The main features of the mask machine are: the use of a cutting-edge control system, the use of simple buttons, and the purpose of individual use. It can form 1 to 4 layers of standardized masks at a time, and the molding speed is fast; the general technology solves the traditional sticking problem. It can achieve a total of 6 stations/2 groups (a total of 12 stations), and the speed is fast.

The main features of the mask machine are: the use of a cutting-edge control system, the use of simple buttons, and the purpose of individual use. It can form 1 to 4 layers of standardized masks at a time, and the molding speed is fast; the general technology solves the traditional sticking problem. It can achieve a total of 6 stations/2 groups (a total of 12 stations), and the speed is fast.

The transmission system of the mask machine includes motors, gears, reducers, sprockets, chains, conveyor belts, etc. It is necessary to check whether there is dust that interferes with heat conduction on the outer surface of the automatic shielding machine. Gears and sprockets are not oiled, are there any accessories? Is the tightness of the chain appropriate? Is there a foreign body? Are the butt screws between the forgings loose? Is the lubricating oil of the reducer sufficient?

What should I pay attention to when inspecting the mask machine?

1. Air supply system for automatic mask machine: (composed of air source filter device, bronchus, and air cylinder).

Check whether there is water in the air filter cup? Add water to the air compressor at the same time (add water to the air compressor: add water to the air compressor every day in humid areas). Check for air leaks in the bronchial tubes. Is there a leak in the cylinder? Is the direction and movement of the magnetic sensor on the cylinder normal?

2. Ultrasonic system: (composed of an ultrasonic electric box, vibrator, soldering pin and a pair of wires).

Check whether the ultrasound system is clean. Especially the ultrasonic electric box, vibrator (transducer), and welding needle (magnification) need to be cleaned easily without water, and the wiring must be firm. Check carefully the damage of the ultrasonic welding needle. Note that we will study the change plan of the voltmeter and ammeter pointer of the ultrasonic electric box.

3. Electrical system:

Check whether the equipment circuit connector is loose and whether the main power line and branch signal line are damaged. Ageing? Is the electrical equipment loose? Is the inside of the electric box clean and concise? Is the exhaust fan operating normally?

Related News

Operating Instructions for Self-Sealing Bag Making Machines

When using a self-sealing bag making machine daily, attention should be paid to cleaning the machine and checking the fasteners to prevent loosening. Attention should also be paid to lubricating the equipment to ensure the normal operation of the self-sealing bag making machine. Let's take a look at its daily usage precautions.

2022-10-20

What are the advantages of self-sealing bag making machines?

There are many types of packaging machines. With the improvement of people's living standards and the rise of the post-90s and post-00s generations, fewer young people are willing to work in factories. It is becoming increasingly difficult for factories to recruit workers; moreover, with the rising labor costs, employee wages are becoming a significant burden for enterprises. Below, we will introduce the advantages of self-sealing bag making machines.

2022-10-11

Share